ICOM iDAS Portable and Mobile Communications

The F1100D/F2100D Series is a sleek portable radio that fits nicely in your hand and designed to be the go to entry to mid level digital radio. Three model choices, basic – no display, simple – display with simple keypad, and full – display and fully DTMF keypad, include an array of features such as IDAS digital mode operation in IDAS conventional and multi-site conventional, intelligent emergency functions, and a rugged waterproof & dustproof chassis. A high-power handling capacity speaker and acoustic improvements provide class-leading (1500 mW) loud and clear audio. This radio is ideal to meet the needs of a wide range of businesses including education, hospitality, and retail.

Channels:

 16 or 128 channels

Output Power:

5W (VHF & 400-470) / 4W (450-512)

Frequencies:

 136-174 MHz

400-470 MHz 

450-512 MHz

Waterproof rating:

 IP67

Programmable Keys:

 3 or 7

Versions:

 No display

Display with simple keypad

Display with full DTMF keypad

The F1100D series provides NXDN™ CAI-based IDAS digital model operation in IDAS conventional and multi-site conventional. The following IDAS features are available:

• IDAS™ Type-D single-site trunking
• Analog/digital conventional mixed mode operation
• AMBE+2™ vocoder
• Over-the-Air updates the Alias list (call list) without programming (LCD versions)
• Individual, group and all call
• Status all and polling
• Short data messages (LCD versions)
• Call alert
• Radio check (RX only)
• The call list can save up to 500 ID numbers for IDAS or MDC1200 signaling system to show in the alias name

For emergency situations the F1100D series includes an emergency key and four emergency functions: man down, motion & stationary detection, lone worker, and surveillance function.

The F1100D Series also includes low-level, 16 bit Digital Voice Encryption.

The F1100 series comes all the popular analog signaling including 2-Tone, 5-Tone, CTCSS and DTCS for group communication and selective calling. MDC features include PTT ID, Emergency (TX/RX), Radio Check (RX), Stun (RX), and Revive (RX).

• Channel announcement
• Siren sound for security alarm
• AquaQuake™ to clear water away from the speaker grill
• DTMF auto dial memories
• "Shift key" function increase the number of programmable key assignments
• Three color LED

Safe and reliable communications is a must in potentially explosive atmospheres. The F3201DEX series operates in both analog and IDAS digital modes and can be used with any existing analog two-way radios. Digital functions include multi-site conventional and Type-D single site trunking. These IDAS radios include a 15-bit digital voice scrambler and voting scan for multi-site conventional operation. The F3201DEX series should be your radio choice for use in hazardous environments.

Channels:

 16 channels

Output Power:

1W

Frequencies:

 136-174 MHz

440-470 MHz

Waterproof Rating:

IP67

Programmable Keys:

3

EX - intrinsincally iafe logo - Icom f3201dexThis is the European Union directive to which all two-way radios must adhere if used in potentially explosive environments. ATEX and IEC have technically identical standards for electrical equipment since 2006. The F3201DEX series will provide some of the highest ATEX Gas, Dust and Mining Protection.

The F3201DEX series has a number of built-in safety features in analog mode. The lone worker function detects when the radio is not operated for a preset period and a beep sounds requiring the user to push a button. If no button is pushed within the preset time, an emergency signal automatically transmits and alerts co-workers or dispatcher. The man down function sends an emergency signal if left in a horizontal position.

In both analog and digital mode, the user can program the red Emergency button to send an emergency tone when pushed.

• Channel announcement
• 2-tone, 5-tone, CTCSS and DTCS built-in for analog mode
• MDC1200 PTT ID and emergency transmission
• DTMF autodial
• Low electrical resistivity body

The F3261 is a higher-end level radio that introduces the power of built-in GPS functions to send data to other IDAS radios or dispatch stations. Along with loud audio, the radio is packed with standard functions such as status message and short data messaging.

Channels:

  512/128 zones

Output Power:

5W

Frequencies:

136-174 MHz

400-470 MHz

450-512 MHz

Digital Conventional:

IDAS built-in

Digital Trunking:

Built-in Type D single-site and multi-site

Programmable Keys:

4 or full key

Waterproof Rating:

IP67

Versions:

Display with simple keypad

Display with full DTMF keypad

• Individual/group call
• Talk back and call mode selection
• SDM (Short Data Message)
• Status message
• GPS
• Radio check
• Stun, kill and revive
• Call alert
• Remote monitor
• Emergency
• Digital voice scrambler
• Block decode
• RAN (Radio Access Number)

The built-in BTL amplifier doubles the audio output power and the large 40mm speaker delivers loud audio to receive all calls under noisy environments. Even when using an optional speaker-microphone, the BTL amplifier output increases the audio output from the external accessory connector.

• 2-Tone, 5-Tone, CTCSS and DTCS
• MDC 1200 compatible
• Inversion type voice scrambler
• Basic LTR™ trunking

• Large 2300 mAh (typ.) Lithium-Ion battery
• Mode dependent scan and priority scan
• Optional waterproof speaker-mic, HM-184
• Busy channel lockout, repeater lockout
• 14-pin accessory connector
• Escalating alarm
• Dot-matrix, multi-function display
• MIL-STD 810 G rugged construction
• DTMF autodial
• Power on password
• Low battery alert
• Time-out-timer
• Surveillance function
• Talk around function

The F52D series portables are the perfect radio to migrate from the F50/V series to IDAS digital. Small and lightweight the F52D series comes with dozens of modern features and functions customers will want. The portable also includes popular F50V features like submergibility, vibration alert, and voice recording/playback for up to 8 minutes. New features include built-in Bluetooth™, a continuous 20-position rotary selector and ON/OFF volume knob that’s tilted for easy access, better dot-matrix display with status icons, and OTAP. Icom is the choice when you want to take your communications to the next level.

Channels:

512 channels w/128 zones

Output Power:

5W

Frequencies:

136-174 MHz

380-470 MHz

450-512 MHz

Digital Conventional:

IDAS built-in

Digital Trunking:

Upgrade available

Programmable Keys:

6

Waterproof Rating:

IP67

Versions:

Standard version

Intrinsically safe version

When pre-programmed 2-tone, 5-Tone, MDC, and/or IDAS signals are received, the radio can vibrate with enough force to be felt through clothing.

Turn on and off the recording manually (with a button) and it will automatically record every incoming call and every transmission from that time forward for up to eight (8) minutes. The F52D series also allows users to program the radio to automatically record all RX and TX all the time, and old messages will delete when the memory is full. Push a pre-programmed button on the radio allowing you to hear "the last message."

For emergency situations the F52D series includes an emergency key and four emergency functions: man down, motion detection, stationary detection and lone worker. The motion/stationary sensor sensitivity level is programmable in 10 levels for each function.

The hazard ready F52D UL/F62D UL is the perfect radio for commercial customers operating in harsh environments. The F52D UL/F62D UL with the intrinsically safe battery meet the ANSI/TIA-4950-A, ANSI/UL 121201 requirements for:

• Intrinsically Safe: Division 1, Class I, Groups C, D
• Class II, Groups E, F, G
• Class III T3C
• Non-incendive: Division 2, Class I, Groups A, B, C D

The F52D series provides NXDN™ CAI-based IDAS digital model operation in IDAS conventional and multi-site conventional. The following IDAS features available:

• Analog/digital conventional mixed mode operation
• Upgrade to Type-D trunking
• AMBE+2™ vocoder
• Over-the-Air Programming with manager software
• Over-the-Air Alias (OAA) sends own name with a call
• Over-the-Air Update (OTAU) changes the repeater channel data and site code over the air (Type-D trunking)
• Individual, group call
• Status call and polling
• Short data message
• Transparent date mode

• Hands-free communication with built-in Bluetooth®
• Transparent data modem can transmit data at 9600bps over the radio
• Channel voice announcement
• Built-in 2-tone, 5-tone, CTCSS, DTCS & MDC1200 in analog
• VOX (voice operated transmission) function
• Tactical group function
• Normal, priority and voting scan
• Voting scan for site roaming
• Digital voice scrambler (low level encryption)
• Analog voice scrambler (inversion)

The F3400D series radios is Icom's new flagship IDAS product. Dozens of new features and functions are included all in one new small form factor size. Features like SD Card, USB interface and Bluetooth appear for the first time in this land mobile product. A brilliant color display allows for easy observation of critical information, in the dimmest of light to the brightest of sunshine. Icom is the choice when you want to take your communications to the next level.

Channels:

32 channels w/2 zones (F3400D)

1024 channels w/128 zones (F3400DS/DT)

Output Power:

5W

Frequencies:

136-174 MHz

380-470 MHz

450-512 MHz

Digital Conventional:

IDAS built-in

Digital Trunking

Upgrade available

LTR®:

Built-in

GPS:

Built-in

Programmable Keys:

5 (F3400D)

13 (F3400DS)

13 + 12 DTMF keys (F3400DT)

Waterproof Rating:

IP68

Versions:

No display

Display with simple keypad

Display with full DTMF keypad

The high-resolution color LCD enhances the visibility both in nature and indoor lighting. Clearly labeled function and menu items make it easy to understand icons and characters. The night mode LCD setting is an alternative for use in night time or low lighting conditions. The glass is scratch resistant to protect from cracks and scratches.

The F3400D series can record incoming and outgoing communications, and replay recorded communications. Add a 32GB microSD card and record up to 500 hours. The recorded audio is saved in "wav" format and allows user to replay on the radio or a PC. Users can optionally overwrite first call in first call out, if the card is full. The recording captures timestamp and individual or group ID. Unit ID is captured on individually calls and group ID is captured on group calls. Users can also scroll to playback calls on the radio.

Updating the F4400D MicroSD is simple. It takes just 5 steps and less than 2 minutes to update the radio with your settings.

For emergency situations the F3400D series includes an emergency button and five emergency functions: man down, motion detection, stationary detection, lone worker and power OFF emergency. The motion/stationary sensor sensitivity level is programmable in 10 levels for each function.

Popular in our marine radios, the AquaQuake draining function emits a vibrating buzz sound that clears water from the speaker grill to help maintain clear audio.

The F3400D series provides NXDN™ CAI-based IDAS digital model operation in IDAS conventional and multi-site conventional. The following IDAS features available:

• Analog/digital conventional mixed mode operation
• Upgrade to Type-D trunking
• Status
• Text message
• Radio check
• Stun, kill and revive
• Call alert
• Remote monitor
• And much more

• Hands-free communication with built-in Bluetooth®
• Tile designed keypad increases durability and visibility
• Transparent data modem can transmit data at 9600bps over the radio
• Send up to 100 character text messages
• Programmable alerts can vibrate when a specific user calls
• Channel voice announcement
• USB port to connect to a PC
• Active Noise Canceling
• Built-in 2-tone, 5-tone, CTCSS, DTCS & MDC1200 in analog
• 14-pin ACC connector with BTL amplifier output
• VOX (voice operated transmission) function
• Tactical group function
• Normal, priority and voting scan
• Radio discovery tool software troubleshoots problems with radio communications and incident analysis

The F5121D series are paired with IDAS and offers digital conventional and single-site trunking. The optional GPS, lone worker function, Logic Trunked Radio (LTR®) and Mixed Mode Operation make it ideal for any operation

Channels:

128 channels/8 zones

Output Power:

50W VHF / 45W UHF

Digital Conventional:

IDAS built-in

Digital Trunking:

Built-in type D single-site

Frequencies:

136-174 MHz

400-470 MHz

450-512 MHz

Programmable Keys:

6

• PTT ID
• Status
• Radio check
• Call alert
• Emergency (no ACK)
• GPS data (PC and software required to show received position data)
• Individual/Talkgroup list (Max 500)
• RAN (Radio Access Number)
• Stun/kill/revive (RX)
• Remote monitor (RX)
• Digital voice scrambler
• SDM (Short Data Message)

2-Tone and 5-tone signaling gives you selective calling, quiet stand-by and other convenient functions with programming. The stun/kill functions disable a radio over the air and the revive function restores the stunned radio

The following MDC features are available with the built-in MDC signaling.

• PTT ID
• Radio check (RX)
• Emergency (No ACK)
• Stun/Revive (RX)
• 500 alias table (Max.)

The priority scan allows you to monitor one or two priority channels while scanning other non-priority channels. The transmit channel and talk back functions allow you to make a quick response while scanning.

When the radio is not operated for a preset period, a warning beep will sound, alerting the radio user to check in. If the radio user does not check in before the preset time runs out, then the radio automatically sends out an emergency signal.

• CTCSS/DTCS encode/decoder*
• 8 DTMF autodial memories
• Microphone hanger action programmable
• PC programmable
• Power-on password function
• Time out timer
• Talk around function
• Nuisance delete function*
• Forced narrow function*

(* = analog only)

With features such as channel announcement, optional GPS and a loud 4W speaker, the F5220D is the ideal entry level mobile unit with IDAS network capabilities.

Channels:

128 channels/8 zones

Output Power:

50W VHF / 45W UHF

Digital Conventional:

IDAS built-in

Digital Trunking:

Built-in Type-D single-site and multi-site trunking

Frequencies:

136-174 MHz

350-400 MHz

400-470 MHz

450-512 MHz

Programmable Keys:

6

• Up to 500 individual and up to 500 group ID aliases (Each for single-site/multi-site/conventional)
• PTT ID and ANI
• SDM (Short Data Message)
• RAN (Radio Access Number)
• Digital voice scrambler
• Call alert
• Radio check (RX)*
• Remote monitor (RX)*
• ATB (All Trunks Busy) ring back
• Status
• Stun/kill/revive (RX)*
• Emergency

*TX: Transmit, RX: Receive

When you change the operating channel, the radio announces the channel number, convenient for making radio adjustments without having to look at the radio.

In the multi-site trunking mode, if the signal condition worsens as the radio user moves, the roaming scan automatically finds a new site to retain the communication link and quality.

• CTCSS/DTCS encode/decoder*
• Microphone hanger action programmable
• Talk around function
• Forced narrow function*
• Voting scan
• Time-out-timer, lock-out penalty
• Power-on password function
• Nuisance delete function

(* = Analog only)

The F5061D/F6061D is ideal for public safety, transportation and delivery service users. It offers advanced multi-mode operations, improved scanning and flexible installation suitable for mobile and base stations.

Channels:

512 with 128 zones

Output Power:

50W VHF, 45W UHF

Frequencies:

136-174 MHz

400-470MHz

450-512MHz

Programmable Keys:

5

Digital Conventional:

IDAS™ built-in

Digital Trunking:

Built-in

LTR®:

Built-in

UT-119HThe IDAS 6.25kHz digital mode is available with the UT-126H* digital board. IDAS is Icom's digital land mobile radio system using the 6.25kHz narrowband FDMA technology. The F5061D series is compatible with the IDAS conventional and IDAS single-site/ multi-site trunking using the NXDN™ common air interface.

*Already installed in the F5061D & F6061D versions

Multi-site conventional systems are possible with IDAS™ LINQ. Choose from the following configurations: LINQ™REPEAT, LINQ™REPEAT+, LINQ™VOTE, and LINQ™VOTE+.

IDAS MultiTrunk opens the possibility of building a regional or multi-campus system of trunking repeaters.

Group, selective, and phone calls are all available in LTR® mode. The beep on receive function informs you with a beep sound when an individual call is received

Use the built-in CTCSS, DTCS, 2-Tone 5-Tone or MDC 1200 capability to set up your own talk groups, and have your radio standby quietly when other groups are talking. The built-in 2-Tone and 5-Tone capabilities allows you to send a tone code with your call and decode multiple tone codes on a channel. 40 pairs of CTCSS/ DTCS memory channels are available.

Advanced automatic number identification (ANI), selective call (Selcall) and emergency call features are available with the built-in MDC signaling. The PTT ID function sends your unit ID number when you push (or release) the PTT button. The received ID number can be decoded to a user name using the alias table. The selcall enables you to call individual or group users as you desire. The emergency call feature allows you to send and repeat an emergency message to dispatch until the dispatch responds to it. In such a situation, the radio can transmit anything the microphone hears and the dispatcher can monitor the background sound. Radio check, status, message, radio stun, revive and call log are also available.

With a high contrast dot matrix display, upper and lower case characters can be easily distinguished. You can change the display setting to show one line and 12 characters, or two lines and 24 characters via programming. LCD backlighting is standard.

The voting operation detects the signal strength level of repeater stations and automatically selects the strongest station or the first station to exceed the preset signal level. This is useful for roaming between 2 or more repeater sites.

GPS OptionIcom’s Quick Silver GPS connects right into the back of the F5061D/F6061D series mobile radios. There is no need to disassemble the radio in order to adopt an AVL feature. Download the Quick Silver brochure!

The Quick Silver GPS has a very sensitive engine. It’s built around the SiRFStar III™ GPS receiver that is extremely sensitive to quickly fix on the satellite for quick location response.

Connect Quick Silver GPS to the radio’s DB-25 accessory connector, attach the supplied GPS antenna and clone the radio to accept GPS messages at the rear accessory connector. No hardware modifications are needed and the Quick Silver GPS does not require any calibration or programming. Installation can even be done without removing the radio from a vehicle if the rear accessory connector is accessible.

While scanning, you can program which Tx channel you want when you press PTT button. Start channel, last detected channel, priority or a preprogrammed channel are selectable. In addition, the nuisance delete function temporary removes a busy channel from the scanning list.

• Detachable front panel for flexible installation
• IP54 dust-protection and splash resistant controller
• Advanced scanning functions including Tx channel, talk back and nuisance delete
• 8 DTMF autodial memories and ANI function with DTMF
• Power on password
• Radio stun and kill functions disable a lost or stolen unit over the air
• Busy repeater lockout function
• Surveillance function temporarily turns off the LED backlight and beep sound
• Microphone hanger action programmable
• Ignition sensing line
• ±1ppm frequency stability
• Embedded ESN
• Flash CPU for future upgrade
• Built-in inversion-type voice scrambler and optional UT-109R/UT-110R available
• D-Sub accessory connector, ignition sensing line and more

The F5400D series radios is Icom's new flagship IDAS product. Dozens of new features and functions are included all in one new small form factor size. Features like SD Card, USB interface and Bluetooth appear for the first time in this land mobile product. A brilliant color display allows for easy observation of critical information, in the dimmest of light to the brightest of sunshine. Icom is the choice when you want to take your communications to the next level.

Channels:

1024 channels w/128 zones

Output Power:

50W VHF, 45W UHF

Frequencies:

136-174 MHz

380-470 MHz

450-512 MHz

Digital Conventional:

IDAS built-in

Digital Trunking

Upgrade available

LTR®:

Built-in

GPS:

Built-in

Programmable Keys:

5 (F5400DS)

7 (F5400D)

Waterproof Rating:

IP55

Versions:

Numerical only display

Full display

The high-resolution color LCD enhances the visibility both in nature and indoor lighting. Clearly labeled function and menu items make it easy to understand icons and characters. The night mode LCD setting is an alternative for use in night time or low lighting conditions. The glass is scratch resistant to protect from cracks and scratches.

The F5400D/F6400D allows the user to configure the radio three ways to suit almost any application or installation requirement. The intercom function is available between controllers and/or COMMANDMIC.

The new COMMANDMIC is an identical physical layout and user interface as the F3400D. By installing in into a vehicle it allows a secondary remote control of the F5400D.

The F5400D series provides NXDN™ CAI-based IDAS digital model operation in IDAS conventional and multi-site conventional. The following IDAS features available:

• Analog/digital conventional mixed mode operation
• Upgrade to Type-D trunking
• Status
• Text message
• Radio check
• Stun, kill and revive
• Call alert
• Remote monitor
• And much more

• Hands-free communication with built-in Bluetooth®
• Safety features: emergency button, lone worker function, and power OFF emergency function
• Transparent data modem can transmit data at 9600bps over the radio
• Send up to 100 character text messages
• Programmable alerts can vibrate when a specific user calls
• Channel voice announcement
• USB port to connect to a PC
• Active Noise Canceling
• Built-in 2-tone, 5-tone, CTCSS, DTCS & MDC1200 in analog
• D-SUB 25-pin ACC connector with programmable functions
• Built-in 20W audio amplifier for connecting with external public address systems
• Tactical group function
• Normal, priority and voting scan

Manage field assets, resources and incidents better by integrating RedHawk SA into your current communications system.

• P25 and analog
• Signal encryption through the radio
• Send and receive text messages
• More accurate GPS field asset location
• Store, send and GOTO waypoints & users
• Built-in, rechargeable 18 hour battery

Scroll through menus to select individual screens and functions using the RedHawk SA's built-in joystick controller.

Maptech Navigator Pro with terrain navigator Pro Team Tracker Upgrade (for US only). ESRI ARC

RedHawk SA Upgrade.

• Locate, poll and set a course, and navigate to a field unit
• See tracks made by other field units in relation to your position, and set a course
• Download all tracks from the unit via USB cable should you need to transfer data to a PC
• Access GIS information for all users on the same radio channel that are in the same group
• See asset and field unit/resource location, speed, heading, directioin and altitude
• See all the tracks made by other users showing search areas covered or travelled
• See the relative distance of a field unit as it relates to the user
• Set a course to a remote user, once in motion calculate the estimated time of arrival and distance to be travelled
• Poll a unit: If a field unit has not been heard from, send a command to receive and update the info