ICOM Regional State Nationwide 2 Way Coverage

The IP501H provides wide area communication using a LTE (4G) and 3G network and instantaneous communication. Individual calls, Group calls or All calls can be made the same way as a conventional two-way radio. The IP501H does not require its own repeaters or IP network, which reduces the costs of building and maintaining a wide area radio network.

Networks:

3G and 4G

Bluetooth:

Built-in

Output Power:

Internal SP: 400mW

External SP: 200mW

Waterproof Rating:

IP67

The IP501H enables use of full-duplex communication providing smooth telephone style conversations. The IP501H users can talk and receive at the same time.

Multiple users in the system can initiate calls respectively. There are no requirements to check or wait for channel availability.

The IP501H supports group calls with three or more people. In case of an emergency, you can break into an on-going call to transmit an important message.

Add the optional Bluetooth® charger kit to your vehicle to make calls with the speaker microphone, while charging the IP501H. Even when the IP501H is not dropped into the BC-218, the Bluetooth® function enables you to wirelessly use the speaker-microphone.

Items needed for the car charger kit:

• BC-218 charger cradle with Bluetooth®
• CP-23L cigarette lighter cable
• MBA-7 mounting bracket
• MBF-1 mounting base
• HM-215 speaker microphone for the BC-218

• High quality, clear audio using G.726 Vocoder
• Individual, Group, Talkgroup, Multiplex Talkgroup and All calls
• Emergency button, Lone Worker and Man Down functions
• Vibration alert function notifies of incoming call
• Text message reception and preprogrammed message transmission
• Up to 500 memory address book (including Group, Individual, Talkgroup and Telephone lists)
• Voice message recording

Icom’s IP730D1 is a revolutionary hybrid radio. With dual PTT buttons, the IP730D transmits and receives LTE, IDAS and analog networks to create nationwide coverage. The IP730D offers flexibility and assurance. Wherever coverage is needed, the IP730D is ready.

Channels:

128 channels

Output Power:

5W

Frequencies:

136-174 MHz

400-512 MHz

Digital Conventional:

IDAS™ built-in

LTE:

Built-in

GPS:

Built-in

Bluetooth®:

Built-in

Programmable keys:

3

Waterproof Rating:

IP67

Dual PTT

The main PTT button is larger and sits above the slightly smaller sub PTT button. Program either PTT button as LTE or IDAS/analog. Two more programmable button sit below the secondary PTT button.

Dual Receive

Receive IDAS, analog and LTE signals at the same time. Prioritize between LTE or IDAS/analog calls by selectively raising the volume. Always stay up to date on both channels.

Bridge Mode

Connect to another site’s IDAS or LTE conversations with Bridge Mode. Bridge Mode links IDAS and LTE transmissions together, allowing LTE transmissions to go over LTE talkpaths or vice versa. Bridge mode does not work with the analog function.

Talk on full-duplex communications, ideal for telephone style conversations. Transmit and receive at the same time. With Priority Interrupt Calling, break into on-going conversations to relay important messages. The built-in GPS receiver can transmit position data at intervals to RDT Live or RDT Pro.

IDAS mode allows interoperation with existing IDAS NXDN systems while still using LTE. When LTE communications unexpectedly go down, benefit from having a dedicated IDAS/analog system as a backup communication resource.

• Over-the-air-programming (OTAP), update radio functions over LTE signals
• Individual, group, and all calls
• 15-bit encryption digital voice scrambler

Emergency and safety features such as Man Down, Lone Worker, and Motion/Stationary/detection are standard, along with the emergency button on top of the radio. If any of these functions are used, the signal is relayed to a controller or dispatcher via IDAS or LTE signals.

• Record and playback up to 4 minutes or a max of 10 messages
• Vibration alert function
• Surveillance function
• AquaQuake™
• DTMF code transmission with optional DTMF microphone, HM-245T
• 500 memory ID address book

The UHF IP740D has not been approved and certified by the Federal Communications Commission, AT&T, and the PTCRB. This device may not be sold or leased, or be offered for sale or lease, until approval and certification of the FCC, AT&T and PTCRB has been obtained.

The IP501M LTE mobile PTT radio provides instantaneous wide area communication using Icom’s LTE-CONNECT network. Users can make Individual calls, Group calls or All calls the same way as a conventional two-way radio. The IP501M does not require its own repeaters or IP network, which eliminates the costs of building and maintaining a wide area radio network. The mobile’s small size is perfect for vehicles with limited space. The IP501M also allows Ethernet connectivity to interconnect with GPS software and other potential functionality in the future.

Networks:

3G and 4G

Bluetooth:

Built-in

GPS:

Built-in

Audio Power:

4 Watts

LAN:

RJ-45 type x 1

Waterproof Rating:

IP54

The IP501M enables use of full-duplex communication providing smooth telephone style conversations (users can talk and receive at the same time).

Multiple users in the system can initiate calls respectively. There are no requirements to check or wait for channel availability.

The IP501M supports group calls with three or more people. In case of an emergency, you can break into an on-going call to transmit an important message.

• Text message to send and receive message of up to 32 characters
• Emergency Call and Lone Worker functions
• Individual, Group, Talkgroup, MultiGroup Calls
• D-SUB 25-pin connector with optional OPC-2407 cable for interfacing other devices
• ACC connector for Ignition Sensing function
• TX Noise Canceling to reduce background noise when operating in noisy environments
• Optional HM-230HB COMMANDMIC provides hand-held-like user interface and more flexibility in equipment mounting