ICOM P25 Public Safety Communications

The F7000 series P25 portables support the ever-advancing P25 standard. The needs for both public service and public safety organizations are also addressed with these radios. Icom’s third generation of this product not only captures the essentials, but offers dozens of new features and functions all in one new small form factor size. Public service and public safety organizations will like the built-in SD Card, GPS, USB interface, Bluetooth®, and color display. Activation options for trunking, OTAR, OTAP and more, allow for expanded or upgraded services without burdening the user with unnecessary features. Icom is the choice when you want to take your P25 communications to the next level.

Channels:

1024 channels w/128 zones

Output Power:

5W (UHF/VHF)

3W (700/800MHz)

Frequencies:

136-174 MHz

380-470 MHz

450-512 MHz

700/800 MHz

P25  Conventional:

Built-in

P25 Trunking:

Upgrade available

GPS:

Built-in

Programmable Keys:

13 (F7000S)

13+12 DMTF keys (F7000T)

Waterproof Rating:

IP68

Versions:

Display with simple keypad

Display with full DTMF keypad

The high-resolution color LCD enhances the visibility both in natural and indoor lighting. Clearly labeled function and menu items make it easy to understand icons and characters. The night mode LCD setting is an alternative for use in night time or low lighting conditions. The glass is scratch resistant to protect from cracks and scratches.

• P25 Phase 1 conventional
• P25 Phase 1 trunking and Phase 2 trunking optional licenses
• P25 voting scan (P25 conventional mode) optional license
• Enhanced dual-rate Vocoder, AMBE+2™
• Analog/digital mixed operation
• Over-the-Air Programming (OTAP) optional license
• Individual and group call
• Unit ID and talkgroup display on receive
• Status update and status query
• Short data message (up to 100 characters)
• GPS position and transparent data transmission optional license
• Call alert
• Phone number list
• Call log

The F7000 series can record incoming and outgoing communications, and replay recorded communications. Add a 32GB microSD card and record up to 500 hours. The recorded audio is saved in "wav" format and allows user to replay on the radio or a PC. Users can optionally overwrite first call in first call out, if the card is full. The recording captures timestamp and individual or group ID. Unit ID is captured on individually calls and group ID is captured on group calls. Users can also scroll to playback calls on the radio.

For emergency situations the F7000 series includes an emergency button and five emergency functions: man down, motion detection, stationary detection, lone worker and power OFF emergency. The motion/stationary sensor sensitivity level is programmable in 10 levels for each function.

• FIPS 140 Level 1 AES with Over-the-air Rekeying (OTAR) optional license and board
• Front panel programming optional license
• Hands-free communication with built-in Bluetooth®
• Tile designed keypad increases durability and visibility
• AquaQuake™ draining function to maintain clear audio
• Channel voice announcement
• USB port to connect to a PC
• Built-in 2-tone, 5-tone, CTCSS, DTCS & MDC1200 in analog
• 14-pin ACC connector with BTL amplifier output
• TX/RX active noise canceller
• TX/RX audio equalizer

Heavy duty and portable, the F9011 and F9021 radios offer both analog conventional and P25 digital conventional operation. The P25 trunked option can be added to operate on local, regional or statewide P25 systems. Designed specifically for the public safety user, the F9011 portables provide excellent operation for both gloved and non-gloved users alike. This product series offers ergonomic advantages that make daily operation comfortable and tactical as expected. Users can choose from a basic non-display, display or display with keypad model. The large 24 character LCD displays various operating statuses and the 4-way cross keypad on the front panel provides an intuitive user interface. Icom is the smart choice for current – and future – public safety communication needs.

Channels:

512 channels w/128 zones

Output Power:

6W (VHF) 

5W (UHF)

Frequencies:

136-174 MHz

380-470 MHz

450-520 MHz

P25 Capability:

P25 Conventional built-in with a P25 Trunking option

Waterproof Rating:

IP67

Programmable keys:

12 buttons, 1 toggle, 1 3-position switch

Compatible Mobile:

F9511 Series

Versions:

Basic model without a display or keypad

Model with a display and limited keypad

Model with display and full DTMF keypad

The conventional voting mode scan detects the signal strength level of repeater stations and automatically selects the strongest station, useful for roaming between two or more repeater sites. After programing the voting mode to a memory zone, the user can easily start voting mode operation by changing the zone setting.

Interoperability

Conforms to the standard specifications for TIA/EIA TSB-102, CAAB, Digital C4FM Transceiver Performance Recommendations and provides interoperability with other brand P25 equipment for public safety applications. The F9011 series is P25 CAP Compliant on the DHS website and more information can be found on the FirstResponders.gov site.

Digital/Analog mixed mode operations

Mixed mode operation allows users to detect and receive both analog FM and P25 digital modes and to transmit either mode depending on programming.

Individual ID and talkgroup ID

Provides 100 individual ID and 250 talkgroup ID memories. Use the display to visually select the person or group to call.

Encryption options

AES and DES encryption keeps conversations secure with the optional AES/DES or DES encryption unit. An optional FIPS AES board is certified to FIPS 140-2 for optimal secure communications.

OTAR (Over-the-Air-Rekeying)

Supports P25 OTAR for changing encryption keys over the air.

Enhanced Vocoder ready

Uses the DVSI's AMBE+2™ vocoder.

ATG (Announcement talkback group)

Call a large group of groups on a trunking network. Dispatcher can hear replies when radios respond to an announcement group call.

ESN programming

Save ESN’s in a cloning file to only allow approved radios on trunking systems.

The dual priority scan monitors two primary channels alternately, while scanning other channels. The mode dependent scan function automatically changes the scan list according to the operating channel. the talk back function with timer beep, TC channel and cancel channel settings allow you to preset the transmission channel when you push the PTT button during scanning operation or cancel the scanning.

• Toggle switch at the top of the radio turns on the encryption.
• Three position switch allows user to quickly select an operation zone.
• Man down unit option sends an emergency signal when the radio is left in a horizontal position for a preset time.
• Tactical group function allows you to copy memory channels to the tactical zone and temporarily regroup memory channels.
• VOX function for hands-free operation.
• Talk around function.

The F7500 series P25 mobiles support the ever-advancing P25 standard. The needs for both public service and public safety organizations are also addressed with the new P25 series. Icom’s third generation of this product not only captures the essentials, but offers dozens of new features and functions all in one new small form factor size. Public service and public safety organizations will like the built-in SD Card, GPS, USB interface, Bluetooth, and color display. Activation options for trunking, OTAR, OTAP and more, allow for expanded or upgraded services without burdening the user with unnecessary features. Icom is the choice when you want to take your P25 communications to the next level.

Channels:

1024 channels w/128 zones

Output Power:

50W VHF

45W UHF

35W 800MHz

30W 700MHz

Frequencies:

136-174 MHz

380-470 MHz

450-512 MHz

700/800 MHz

P25 Conventional:

Built-in

P25 Trunking

Upgrade available

GPS:

Built-in

Programmable Keys:

7

Waterproof Rating:

IP55

The high-resolution color LCD enhances the visibility both in nature and indoor lighting. Clearly labeled function and menu items make it easy to understand icons and characters. The night mode LCD setting is an alternative for use in night time or low lighting conditions. The glass is scratch resistant to protect from cracks and scratches.

• P25 Phase 1 conventional
• P25 Phase 1 trunking and Phase 2 trunking optional licenses
• P25 voting scan (P25 conventional mode) optional license
• Enhanced dual-rate Vocoder, AMBE+2™
• Analog/digital mixed operation
• Over-the-Air Programming (OTAP) optional license
• Individual and group call
• Unit ID and talkgroup display on receive
• Status update and status query
• Short data message (up to 100 characters)
• GPS position and transparent data transmission optional license
• Call alert
• Phone number list
• Call log

The F7500 series mobiles allows the user to configure the radio three ways to suit almost any application or installation requirement. The intercom function is available between controllers and/or COMMANDMIC.

The new COMMANDMIC is an identical physical layout and user interface as the F7010. By installing in into a vehicle it allows a secondary remote control of the F7500.

• FIPS 140 Level 1 AES with Over-the-air Rekeying (OTAR) optional license and board
• Front panel programming optional license
• Hands-free communication with built-in Bluetooth®
• Tile designed keypad increases durability and visibility
• Programmable ringer peep
• USB port to connect to a PC
• Built-in 2-tone, 5-tone, CTCSS, DTCS & MDC1200 in analog
• Programmable D-SUB connector for external PTT, channel honr, PA/RX speaker, ignition switch and dimmer control
• TX/RX active noise canceller
• TX/RX audio equalizer

For organizations who run an analog radio system and must migrate to a conventional P25 digital system, Icom provides one of the best solutions. The F2821D series mobile allows you to program P25 digital and/or FM analog mode per channel. Flash ROM capability means future upgrades and flexible customization, tailored for your system. Moreover, built-in multiple tone signaling capability and an optional voice scrambler satisfy existing analog FM system requirements. Icom’s frequency range coverage and rugged construction ensures a flexible, long life radio for you. Icom is the smart choice for current – and future – public safety communication needs.

Channels:

256 channels, 32 zones

Output Power:

45W

Frequencies:

400-470 MHz

450-512 MHz

Programmable Keys:

5

Versions:

UHF P25 ready with full DTMF keypad

UHF P25 upgradeable with full DTMF keypad

The F2821D is P25 compliant. The mixed mode scan is compatible with both analog FM mode and P25 digital mode allowing users to program digital and/or analog FM modes per channel. The mixed mode scan allows you to detect and receive both analog FM and P25 digital modes and to transmit either mode depending on programming.

For basic encryption the F2821D comes with a built-in inversion type voice scrambler. For a slightly more secure system, the optional rolling and non rolling (UT-109/UT-110) are available. Many public safety agencies require high level encryption: AES & DES. Icom offers an AES and DES upgrade to provide secure encryption for the F2821D.

With heavy-duty construction, the F2821D is built to last. The F2821D incorporates a 4W speaker in an impact resistant polycarbonate front panel for crisp clear audio, and includes a backlit 10-keypad for extended operation.

• High contrast LCD with dot matrix display and 1 or 2 lines of characters
• MDC1200 compatible
• Built-in CTCSS, DTCS, 2-tone, 5-tone
• Encode or decode up to 10 2/5-tone signals on a channel
• Detachable front panel for flexible installation
• Radio stun/kill disables a lost or stolen radio over the air
• Power-on password prevents unauthorized people turning on the radio
• Public address (PA) function allows user to speak through the radio mic
• RX speaker function allows user to relay the received audio over the loud speaker
• Microphone hanger action programmable (scan, monitor, priority channel)
• Optional OPC-617 D-SUB 9 pin connector for dimmer control, modem connection
• D-SUB 25 pin connector for future PC connection
• Built-in audio compander (Analog mode only)

With the consideration of today’s public safety vehicles, the F9511/F9521 heavy duty mobile radios provide several options for installation and power. The F9511/F9521 heavy duty mobile radios offer both analog conventional and P25 digital conventional operation. Add the P25 trunked option to operate on local, regional or statewide P25 systems.  Typical under-dash mounting along with remote mount configurations are available to allow efficient placement and use of the radio. The 110W high power VHF version provides the power required for rural and remote operation. A water resistant rating of IP54 for the control head means that the occasional or required cleaning of the vehicle interior is protected. Assignable function buttons, with customizable backlit covers allow flexibility of user functions and quick access to them. The backlit auto-dim feature allows clear vision of the display and reduced eye fatigue for night driving.  Icom is the smart choice for current – and future – public safety communication needs.

Channels:

512 channels, 128 zones

Output Power:

50W VHF

110W VHF (High Power Model)

50W UHF

Frequencies:

136-174 MHz

400-470 MHz

450-512 MHz

P25 Capability:

P25 Conventional built-in with a P25 Trunking option

Programmable Keys:

5

Compatible Portable:

F9011 Series

Versions:

Model with a display and limited keypad

Model with display and full DTMF keypad

The conventional voting mode scan detects the signal strength level of repeater stations and automatically selects the strongest station, useful for roaming between two or more repeater sites. After programing the voting mode to a memory zone, the user can easily start voting mode operation by changing the zone setting.

Interoperability

Conforms to the standard specifications for TIA/EIA TSB-102, CAAB, Digital C4FM Transceiver Performance Recommendations and provides interoperability with other brand P25 equipment for public safety applications. The F9011 series is P25 CAP Compliant on the DHS website and more information can be found on the FirstResponders.gov site.

Digital/Analog mixed mode operations

Mixed mode operation allows users to detect and receive both analog FM and P25 digital modes and to transmit either mode depending on programming.

Individual ID and talkgroup ID

Provides 100 individual ID and 250 talkgroup ID memories. Use the display to visually select the person or group to call.

Encryption options

AES and/or DES encryption keeps conversations secure AES or DES encryption unit. A FIPS AES board is certified to FIPS 140-2 for optimal secure communications.

OTAR (Over-the-Air-Rekeying)

Supports P25 OTAR for changing encryption keys over the air.

Enhanced Vocoder ready

Uses the DVSI's AMBE+2™ vocoder.

ATG (Announcement talkback group)

Call a large group of groups on a trunking network. Dispatcher can hear replies when radios respond to an announcement group call.

ESN programming

Save ESN’s in a cloning file to only allow approved radios on trunking systems.

The dual priority scan monitors two primary channels alternately, while scanning other channels. The mode dependent scan function automatically changes the scan list according to the operating channel. The talk back function with timer beep, TC channel and cancel channel settings allow you to preset the transmission channel when you push the PTT button during scanning operation or cancel the scanning.

• Programmable D-Sub 25-pin ACC connector for connecting external devices.
• Detachable front panel for flexible installation.
• 22W amp for PA when external speaker is connected.
• RX speaker function allows user to relay the received audio over the loud speaker.
• Dot matrix LCD, upper and lowercase characters show up to 2 lines and 25 characters.
• Tactical group function allows you to copy memory channels to the tactical zone and temporarily regroup memory channels.
• Talk around function.
• Microphone hanger action (On hook scan and off hook monitor).

Manage field assets, resources and incidents better by integrating RedHawk SA into your current communications system.

• P25 and analog
• Signal encryption through the radio
• Send and receive text messages
• More accurate GPS field asset location
• Store, send and GOTO waypoints & users
• Built-in, rechargeable 18 hour battery

Scroll through menus to select individual screens and functions using the RedHawk SA's built-in joystick controller.

Maptech Navigator Pro with terrain navigator Pro Team Tracker Upgrade (for US only). ESRI ARC

RedHawk SA Upgrade.

• Locate, poll and set a course, and navigate to a field unit
• See tracks made by other field units in relation to your position, and set a course
• Download all tracks from the unit via USB cable should you need to transfer data to a PC
• Access GIS information for all users on the same radio channel that are in the same group
• See asset and field unit/resource location, speed, heading, directioin and altitude
• See all the tracks made by other users showing search areas covered or travelled
• See the relative distance of a field unit as it relates to the user
• Set a course to a remote user, once in motion calculate the estimated time of arrival and distance to be travelled
• Poll a unit: If a field unit has not been heard from, send a command to receive and update the info